Revit 2020 Converting a Mass Into a Family

Simple Mass Modeling in Revit

From TOI-Pedia

Introduction

Within Revit, Mass Modeling is a fast mode to depict conceptual volumes. There are ii ways of creating a mass. The starting time is past creating a Conceptual Mass Family, which is a mass that is created outside the project. The second is past creating an In Identify Mass. This is a mass that is created within the project. In this tutorial nosotros explicate how to create an In Identify Mass.

Setting up the guidelines

Before actually creating your mass, it's proficient practice to create some guidelines commencement. Grids and Levels give you the possibility to snap your geometry to predefined dimensions.

Changing Levels

• Go to the Projection Browser and open an elevation view and create your desired levels, conform them to the correct height and give them a sensible name.

Calculation a Grid-line

• The second step is to create grid lines. Change your view to a floor program and create your desired filigree.

Creating an In Identify Mass

In Place Mass

In one case we have our guidelines set up, we can showtime creating our Mass.

• Go to the Floor Plan where you lot want to create the mass.
• In the Ribbon, select the Massing & Site tab and click In Place Mass. When it is the first mass to be created within the projection, a popular upward will appear stating that Revit has enabled the Show Mass style. Click Close. (If masses are already visible the Evidence Mass manner is already turned on and this pop up will not evidence)
• Adjacent a pop up will appear asking for a name for the mass. Give it a sensible proper noun.
• Now we can create the outline of the mass. Nosotros tin can either do this by cartoon Model Lines or by drawing Reference Lines. Model Lines will disappear subsequently creating the mass. Reference Lines will remain so they can exist used every bit a basis for additional masses.
• First choose or make a construction plane with the Set button on the Work Plane tab. With the Tab key yous tin cycle through planes of objects while hovering the mouse pointer over them, fifty-fifty (end) of (reference) lines.
• Sometimes to many objects (everything in Revit is an object) are in the style. Select what you desire to temporarily hibernate and striking 'hh' (twice the h-key). Or select what you temporarily want to isolate and striking 'howdy'. To reveil what is hidden, hit '60 minutes'.
• You can draw several types of lines to make a profile for the 3D form. If you combine them into a airtight non-intersecting shape, and striking Create Grade, Revit volition show in the next step two possibilities you can click on: a flat surface (if the shape was flat) or a 3D form every bit a result of an extrusion. This means that a path is used perpendicular to the shape, like if the shape is repeated along that path.
• But you can as well select several non-intersecting curves (closed or not). In that case Revit will try to create a loft. This ways that a fluent form is created with the curves as sections.
• Or if you select a bend and a straight line on the same plane, Revit will endeavor to make a revolve. This means that the form is made every bit in pottery: rotation around the line.
• If you lot select the piece of work plane at the end of a curve and create a 2nd bend there, Revit will endeavour to brand a sweep. Meaning that the kickoff curve is used as a path, along which the second curve is repeated.
• Discover that you lot can turn on 3D snapping in the option bar, which allows to go exterior the structure plane.
• You lot tin can mirror, align, cutting etc. contour elements with buttons in the Modify tab. Apply an aligned dimension to e.g. move a cut to the centre of a profile chemical element by clicking on a reference line, the cut point (apply your Tab key) and another reference line and hitting the EQ push button that appears next to the dimension. Notice that the dimension object belongs to a construction airplane.
• When you select a finished mass in the project, Revit will display in the properties window the total area of all the mass surfaces and the volume, but not the floor area. However if you select the mass and hit the Mass Floors push in the Change|Mass tab you can create mass floors and the gross floor surface area will be shown in the properties window. Information technology is annoying that you tin can't see the floor surface area while creating the mass. A solution is to make an area parameter (hit the Family Types button height left) and use formula's to calculate the area, but this is for advanced Revit users.

Create Course

• Go to a 3D View and select the top of the shape. Sometimes it seems you are not able to select the top surface. Past clicking the Tab key on your keyboard, you tin can bicycle through the elements that are possible to select for a certain mouse position, similar surfaces, edges and corner points. Sometimes y'all first have to unlock the element.
• When the acme surface of the volume is selected go to an elevation to move the surface by using the arrows. Yous can snap to the desired Level. Y'all cannot only do this for surfaces, but also for edges and corner points.

Selecting the Volume and Moving Surfaces, Edges or Corner Points

• By removing edges and/or corner points, yous can create different shapes like a common roof.
• To stack masses on tiptop of each other, but go the Floor Programme of the level above, and create a new mass.
• Create all the masses until you are satisfied with the shape of the combined masses and click End Mass.

Creating a Void Class

Create Void Form

• Select the Mass and clicking the Edit Mass button
• Go to the Flooring Programme where you want to create the void form.
• At present we tin create the outline of the void form.

Edit Void Course

• Draw a closed shape. It can be any shape, simply make certain it forms a closed loop.
• Instead of selecting Create Grade select Void Course from the dropdown menu.
• You tin can edit the void form similarly to the solid forms, to move and/or remove edges
• Click Cease Mass to subtract the void grade from your original mass.

Changing the appearance of an In Identify Mass

By default masses are created with some sort of semi-transparent advent. To alter this, nosotros have to modify the material settings of the mass. You can do this by clicking the Edit Mass button. By selecting the entire mass y'all can change the material for all the objects inside the mass. If yous select individual surfaces (past using the "Tab" button) you lot tin allocate multiple materials within ane mass.

• One time you have fabricated your choice, in the Properties window, backside Material a small-scale button with some dots appears in the upper right corner of the cell. Click this button to enter the Material Browser window. Or hit the button next to it and create a fabric parameter. In one case you finished the mass, you lot can set the material and then in the projection (easier to evaluate the outcome in the whole situation).

• Select a suitable material, or create a new material by clicking the small sphere nether the material listing.

• Right-click the "New Default Fabric", select "rename" and give it a sensible proper noun.
• Under the Graphics tab, set the Color and Transparency to your desired settings and click OK.

• Click Cease Mass.
• Make sure to gear up the view fashion to Shaded, to be able to encounter colors.

johnsoncolooter1982.blogspot.com

Source: http://wiki.bk.tudelft.nl/toi-pedia/Simple_Mass_Modeling_in_Revit

Share this post